RS232C, USB, PARALLEL CABLES, T-SWITCH BOXES, PUNCH READERS

Also see the NC Data Servers, Paper Tape, Mylar and Cimcom CNC software pages.

T-switch boxes for serial or parallel switching or sharing of data, RS232C or parallel, Numerical Control or CNC to IBM® interfacing cables

Prices updated 12/29/2011

Custom Search

Switch Boxes are used to connect and switch any two to six compatible devices. If you have more than eight, then we daisy chain them. They eliminate the need to move computer cables manually. Double utilization of your terminals, printers, computer ports, modems, microcomputers, plotters, word processor ports, etc. Caution: Some cheap switch boxes are not designed for rugged machine shop usage and do not switch all lines which you need for NC. Also, use our 6 foot DB9S to DB25P cable from IBM® PC to switch ( p/n CAB6T925 or CAB6T99 ) for $16.00

Premium Quality T - Switch Boxes

(All lines switched)

Order#	T - Switch Description	Price
SW9063	AB (1 in - 2 out) with 3 DB25S (female 25 pin)	$32.00
SW9067	ABCD (1 in - 4 out) with 5 DB25S (female 25 pin)	59.00
SW9093	AB (1 in - 2 out) with 3 DB9S (female 9 pin)	32.00
SW9094	ABCD (1 in - 4 out) with 5 DB9S (female 9 pin)	59.00
SW9095	ABCD (1 DB9S female in - 4 DB9P male out) all 9 pin	59.00

RS-232C Cable 9 pin female on PC to 9 or 25 pin male. This is used from computer com port to switch box straight thru.
Order#	Description	Price	Buy
CAB6T925	6 foot length IBM DB9S to T-Switch DB25P	$16.00
CAB6T99	6 foot length IBM DB9S to T-Switch DB9P	16.00

Gender Changers for Cables or Switch boxes
Order#	Description	Price
GENFF25	Gender changer 5/8 inch wide female/female (2) DB25S	$5.00
GENMM25	Gender changer 5/8 inch wide male/male (2) DB25P 25 pin	5.00
GENFF9	Gender changer 5/8 inch wide female/female (2) DB9S 9 pin	5.00
GENMM9	Gender changer 5/8 inch wide male/male (2) DB9P 9 pin	5.00
USBM9	USB to Serial RS232C DB9 Male 2' Cable and Driver CD Kit Allows bi-directional speeds of 0-38400bps USB to CNC's and 0-600bps to Punch/Readers. You would also need an RS232c cable to your CNC or Punch. See RS232C this page. For CNC transfer software see Cimcom. The Standard-A USB plug is approx. 4 by 12 mm. Supported platform Windows 95/98/ME/2000/XP/Vista & 7 32bit/NT3.51/NT4.	29.00

Parallel Cables all 25 wires straight thru, 25 pins (DB25). Can be used for RS232C or parallel as extender cables.
Order#	Description	Price
PAR3MM	3 foot cable male/male DB25P	$12.00
PAR6MM	6 foot cable male/male DB25P	15.00
PAR10MM	10 foot cable male/male DB25P	20.00
PAR10MF	10 foot cable male/female DB25	20.00
PAR10FF	10 foot cable female/female DB25S	20.00
PAR25MF	25 foot cable male/female DB25	30.00
PAR25MM	25 foot cable male/male DB25P	30.00
PAR50MF	50 foot cable male/female DB25	45.00
PAR50MM	50 foot cable male/male DB25P	45.00

Punch Reader Manuals
Order#	Description	Price
ManLRP300	DSI LRP300 Operators manual	$45.00
ManSRP300	DSI SRP300 Operators manual	50.00
ManSRP3075	DSI SRP3075 Operators manual	65.00
ManSP75	DSI SP75 Operators manual	65.00
ManNC2400	DSI NC2400 Operators manual	65.00
Man4601	GNT 4601 Operators manual	50.00
Man4604	GNT 4604 Operators manual	50.00
Man4606	GNT 4606 Operators manual	50.00
Man4042	FACIT 4042 Operators manual	65.00
Man4047	FACIT 4047 Operators manual	65.00
ManN4000	FACIT N4000 Operators manual	65.00
Man4070	FACIT 4070 Operators manual	25.00

Custom built RS 232C Cables for Punch Readers. All are made with shielded wire and tested
Order#	Description	Price
CabLRP300	Cable 10 foot long IBM® serial RS 232c DB9S (9 pin female see note!) from PC com port to DSI LRP300* punch reader.	$53.00
CabNC2400	Cable 10 foot long IBM® serial RS-232c DB9S (9 pin female see note!) from PC com port to DSI NC2400* punch reader.	53.00
Cab4601	Cable 10 foot long IBM® serial RS-232c DB9S (9 pin female see note!) from PC com port to GNT 4601* punch reader.	53.00
Cab4604	Cable 10 foot long IBM® serial RS-232c DB9S (9 pin female see note!) from PC com port to GNT 4604* punch reader.	53.00
Cab4047	Cable 10 foot long IBM® serial RS 232c DB9S (9 pin female see note!) from PC com port to Facit 4047 and N4000* punch.	53.00
USBM9	USB to Serial RS232C DB9 Male 2 ft Cable and Driver CD Kit Allows bi-directional speeds of 0-38400 bps USB to CNC's and 0-600 bps to Punch/Readers. You would also need an RS232c cable to your CNC or Punch. See RS232C this page. For CNC transfer software see Cimcom. The Standard-A USB plug is approx. 4 by 12 mm. Supported platform Windows 95/98/ME/2000/XP/Vista & 7 32bit/NT3.51/NT4.	29.00

* Caution! Older computers may require a DB25S 25 pin female on the cable. Please let us know if you need this!

Custom built RS-232C Cables for NC or CNC Machines. All are made with shielded wire and tested.
PC to NC or CNC	Price	Select and Buy
Cable 10 foot long IBM® serial RS 232c DB9S (9 pin female *see note!) from PC com port to NC/CNC (25 pin male).	$53.00
Cable 25 foot long IBM® serial RS 232c DB9S (9 pin female *see note!) from PC com port to NC/CNC (25 pin male).	65.00
Cable 50 foot long IBM® serial RS232c DB9S (9 pin female *see note!) from PC com port to NC/CNC (25 pin male).	85.00
Cable 75 foot long IBM® serial RS232c DB9S (9 pin female *see note!) from PC com port to NC/CNC (25 pin male).	105.00
Cable 100 foot long IBM® serial RS232c DB9S (9 pin female *see note!) from PC com port to NC/CNC (25 pin male).	125.00
Switch box to your NC or CNC	Price	Select and Buy
Cable 10 foot long IBM® serial RS232c DB25P (25 pin male) from switch box to NC/CNC (25 pin male).	53.00
Cable 25 foot long IBM® serial RS232c DB25P (25 pin male) from switch box to NC/CNC (25 pin male).	65.00
Cable 50 foot long IBM® serial RS232c DB25P (25 pin male) from switch box to NC/CNC (25 pin male).	85.00
Cable 75 foot long IBM® serial RS232c DB25P (25 pin male) from switch box to NC/CNC (25 pin male).	105.00
Cable 100 foot long IBM® serial RS232c DB25P (25 pin male) from switch box to NC/CNC (25 pin male).	125.00

* Caution! Older computers may require a DB25S 25 pin female on the cable. Please let us know if you need this!

PAPER TAPE PUNCH READERS

30 day in-house warranty on repairs, you pay the freight

FACIT N4000 75 cps punch reader, serial with EIA, ASCII, ISO $1495 Rebuilt, exchange. No trade in, add $100.00 With exchange $1495.00 No accessories will be sent, hold your machine until you receive our box. With no exchange $1595.00

FACIT 4047 75 cps punch with paper tape reader, serial with EIA, ASCII, ISO $1495 Rebuilt, exchange. No trade in, add $100.00
With exchange $1495.00 No accessories will be sent, hold your machine until you receive our box. With no exchange $1595.00

GNT 4604 400 cps read, 75 cps punch, serial with EIA, ASCII, ISO. Brochure
Baud rate 110-9600
Voltage: 100-125v and 200-250v
RS232C/v24 or RS491 standard.
20/60 mA current loop and parallel are standard.
$5095.00 NEW, with exchange. No trade in, add $100.00
With exchange $5095.00
No accessories will be sent, hold your machine until you receive our box. With no exchange $5195.00

DSI NC2400 240 cps reader, 75 cps punch, serial with ASCII, ISO $1495 Rebuilt, exchange.
No trade in, add $100.00 Rental $165.00/month, one month minimum.
With exchange $1495.00 No accessories will be sent, hold your machine until you receive our box. With no exchange $1595.00

DSI LRP300 30 cps reader, 30 cps punch, serial with ASCII, ISO $1195 Rebuilt, exchange. No trade in, add $100.00 Rental $125.00/month, one month minimum.
With exchange $1195.00 No accessories will be sent, hold your machine until you receive our box. With no exchange $1295.00

Use the buttons below to view your items and checkout at any time

WNC Supply | 37841 N 16th Street Phoenix, AZ USA 85086-0752 | (623) 594-4602 FAX (623) 594-3769

E-Mail: sales@wncsupply.com Stop by again soon at http://www.wncsupply.com/rs232c.html

RS232C, USB, PARALLEL CABLES, T-SWITCH BOXES, PUNCH READERS

Premium Quality T - Switch Boxes

(All lines switched)

PAPER TAPE PUNCH READERS

Copyright © 1996 - 2012 WNC Supply All rights reserved