Prices updated Apr 19, 2008

Reeldex reels are designed to reduce operator tape-handling time. A protective cover which locks into place is provided with each reel. Each dust cover has 2 legs which allow the reel to stand up by itself. We recommend our R-2 tape winder for winding 1 inch wide tape with these reels.

Model R25

• R25 is 2.5" in diameter & red in color
• Holds up to 80 feet of tape
• Comes with .5" diameter shaft only
• Ideal for short tape programs

Model R30 & R35

• R30 is 4" in diameter & blue in color
• R30 holds up to 220 feet of tape
• R35 is 5.25" in diameter & gray in color
• R35 holds 400 feet of tape
• Core can be removed to change from .5" to 1.25" diameter shafts

Model 85 standard plastic gray reel found on most tape controlled equipment. A simple twist separates the two halves for easy tape removal. It has a 1/2" dia. center hole and a 1.9" dia. tape core.

 

REEL SPECIFICATIONS (in inches)

Model#	Tape Width	Tape Core Dia.	O.D.	Spindle Dia.
R25	1	2	2.5	.5
R30	1	2	4	.5 and 1.25
R35	1	2	5.25	.5 and 1.25
Model 85	1	2	8.5	1.9

Adaptor Model 60 Model #60 converts 1/4" diameter O.D. shaft to 1/2" diameter O.D. by slipping over the 1/4" shaft. These are usually used on a numerical control paper tape reader to convert the reel type. The R-2 winder comes with a Model 60 adaptor.

Model R-2FP CORDLESS RE-CHARGEABLE WINDER

This model is a re-chargeable power winder. The R-2FP has a face plate which has a center post and tape slot, to replace the tape reel, for easier winding and storage of shorter tapes. The tape is removed from the plate by simply sliding it off the center post. Standard reels can also be used which have a 1/2 inch diameter hole. This winder is able to quickly wind loop or standard tapes up to 200' long. Comes with a re-charger and battery.