Cimcom® Software, Windows RS232C or USB Transfer to CNC or Punch Readers

Serial & USB Data Transfer Software for the Machine Tool Industry. Also see NC Data Servers.
WNCEDIT (CNC Code Editor) and SEQNO (for N numbers) software features now are included FREE
Cimcom® is WNC Supply's File Transfer Software for NC or CNC Shops.  It has been in use for over 21 years in thousands of shops world wide.  Version 4.0 is our latest release.  It incorporates a new user interface, better user setup management, improved line/protocol error detection, support for hardware handshaking, better on-line help, and much more.  Download a trial version today.

Visa CardMaster Card Discover CardAmerican Express Paypal    Prices updated 02/07/2010   

Custom Search

Cimcom Version 4.0 Features:

Cimcom CD & manual Windows Support - Cimcom has been tested on Stand-Alone machines running Win 95/98/ME/2000/XP/Vista & 7 32bit, and NT4 Workstation, on peer networks using Win 95 and 98, and TCP/IP based networks running Win NT 3.51 and NT4 Server with Win 95/98 workstations. Using your installed Windows networking support Cimcom can use fully qualified network paths for User Profile storage folders. If the path exists in your network browser, then you can use that path with Cimcom. Though version 4.0 is not intended to be a multi-user release, with care, the program can be installed on your network server and run from any Windows client machine.

User Interface - Cimcom's interface makes using the program much easier for new and old users alike.  Most Cimcom features can be accessed through a variety of methods (menus, push buttons).  With this interface the port status can always be displayed.

Cimcom User Profile
Edit User Profile Form (click to enlarge)

User Profile Management - Cimcom improves your ability to save various configurations to individual 'User Profiles'. This allows you to setup a profile for each user, machine tool, or serial (rs232c) device that Cimcom would communicate with. Then selecting a different configuration is as simple as selecting the desired User Profile. These user profiles have been improved with Windows network support and increased capacity.

More Features - Cimcom v4.0 can now indicate which line in a cable may be malfunctioning, or what caused a data transfer to terminate.  It also supports machines that use Hardware Handshaking (RTS/CTS as their flow control method).  We've also added a new Help System that effectively provides the User's Manual On-Line.

Improved Terminal Support - With v4.0 Cimcom provides an ANSI terminal emulator to provide support for older controls that previously used teletypes as their data input devices, such as older Bridgeport Boss controls. Using Cimcom can bring most of the benefits of DNC without the expensive hardware costs.

Cimcom Main Screen
Cimcom Main Screen (click to enlarge)

TWO WAY COMMUNICATION BETWEEN CNC CONTROLLER AND COMPUTER

CIMCOM® is a flexible communication system for your IBM-PC ( Win 95/98/ME/2000/XP/Vista& 7 32 bit/NT3.51/NT4 computer). CIMCOM uploads part programs from your computer's hard disk to your CNC machine tool controller. Or after you have massaged and edited the program on the machine to optimum running efficiency, CIMCOM will download it back into a file on your disk drive. WNC can assist you by making your cables for CNC hookup (RS232C or USB) We can supply switch boxes and USB adaptor cable with driver.

SEND/RECEIVE TO CNC OR PUNCH/READ A TAPE IN ASCII OR EIA

If you need a punched tape of your part program, CIMCOM will handle this task with equal ease. You have your choice of producing a punched tape in ASCII - ISO or EIA format. CIMCOM will read an ASCII - ISO or EIA tape and send it to a disk file, to the printer, or just to your screen for reviewing.

You can set up communication parameters such as serial port number, baud rate, parity, data bits, stop bits, and timeout delay for an unlimited number of your output devices (punch, reader, controller). You can specify the length of tape leader/trailer, termination character and upper case conversion. Man-readable characters may be punched at the beginning of each tape according to what you type in.  Download a trial version today.

WNCEDIT® full screen EDITOR features mouse support (but not required), mass changes, insert, delete, mark areas to cut and/or paste from buffer, search, PgUp/Dn, Home, End, on-line help, whole or multiple line delete or paste and much more. Below is the main editing screen. It has been integrated into version 4.0 of Cimcom.

WNCEDIT Editor screen
(click to enlarge)

SEQNO® FILE RE SEQUENCING feature performs many operations dealing with sequence numbers (N0001, N0002, etc). You may set beginning and ending numbers, set the N letter to any letter, set increment (by 1, 10, etc), ask for leading zeros if needed, set the line number to begin sequence numbers, remove all sequence numbers, and select special characters which should not receive sequence numbering. It has been integrated into version 4.0 of Cimcom.

Re sequencing screen
(click to enlarge)

Need Interface CABLE or USB help?

WNC can assist you by making your cables for punches, BTR's or CNC hookup (RS232C) and can supply switch boxes. We can help you wire all your machines to your computer without visiting your shop.  Usually all we need is the control make and length of cable you will need. Take advantage of our 41 years of experience.  If you require a cable, one or more can be ordered using our shopping cart on RS232C page. This may be your best option since each punch or CNC controller may require a different wiring scheme. For this reason, no pin outs are supplied with CIMCOM and no pin outs will be given out over the telephone. Our cable making department will usually ship even a special cable the same day ordered.

Cimcom Version 4.0 for Windows is $185.00 on CD (with WNCEDIT, SEQNO and manual)

v4.0 features support for Win 95/98/ME/2000/XP/Vista & 7 32 bit/NT3.51/NT4 and requires 16 MB ram

Description Price Buy
CIMCOM Full Package for Win 95/98/ME/2000/XP/Vista & 7 32bit/NT3.51/NT4 $ 185.00
CIMCOM Update if You Purchased any older version 49.00
Cimcom Extra Seat Pricing, (each computer) 25.00
P/N USBM9 USB to Serial RS232C DB9 Male 2 ft Cable & Driver CD Kit
Allows bi-directional speeds of 0-38400 bps USB to CNC's and 0-600 bps to Punch/Readers.
You would also need an RS232c cable to your CNC or Punch. See RS232C cable page.
For CNC transfer software buy Cimcom. The Standard-A USB plug is approximately 4 by 12 mm.
Supported platform Windows 98SE/ME/2000/XP.
29.00

cimcom demo download

Download CIMCOM v4.0 Windows Demo (1,089,031 bytes zip)

About Us | Home | Maco Labels & Tags | Oce Media Site Map | Site Map

Calcomp Pens | Cd's - Jewel Cases | Containers | Diskettes | Hewlett Packard Pens | Houston Pens | Tape made of Mylar | NC Data Servers | Other Plot Pens | Paper Tape Rolls | Plotter Paper | Reels | RS232C Products, Cables, Punch Manuals | Splicers - Hand Punches | Switch Boxes

 WNC Supply   |   37841 N 16th Street    Phoenix, AZ USA 85086-0752  |  (623) 594-4602   FAX (623) 594-3769
E-Mail: sales@wncsupply.com   Stop by again soon at http://www.wncsupply.com/cimcom.html

Copyright © 1996 - 2010 WNC Supply   All rights reserved